Format Usb Drive For Mac And Pc
2021年1月18日Download here: http://gg.gg/nwdix
What Can You Do with Bootable USB Hard Drive Format Utility?
*Which Format For Usb Drive For Mac And Pc
*Sandisk Usb Format Tool
*How To Format Usb Drive For Mac And Pc
*Disk Utility Format Usb For Mac And Pc
*Format A Usb Drive For Mac And Pc
*Cannot Format Usb Drive Windows 10Which Format For Usb Drive For Mac And Pc
Almost everyone knows that formatting hard drives is not a difficult job and can be easily done with the built-in Disk Management tool in Windows. However, formatting a hard disk could be complex when your operating system cannot boot properly or your disk fails to work normally. That’s when you need to create a bootable USB to format your hard drive. You can format hard drive from USB by using a bootable USB drive created by a third-party HDD format tool or a Windows installation disk. Both are effective bootable USB hard drive format utilities. Read on and carry out the method best suited to your needs.
Both Windows and Mac OS offer built-in disk formatting tool. For Windows, it offers quick format feature when you right-click the hard drive on the computer. If you are using a Mac, you can run the built-in Disk Utility to quickly format a hard drive or external hard drive under Mac OS. Why should you consider formatting your hard drive? You might already know the consequences of.Sandisk Usb Format ToolPAGE CONTENT:Format HDD from USB with bootable format toolFormat hard drive from USB via Command promptFormat hard drive from BIOSMethod 1: Format Hard Drive from USB with Bootable format Tool
The simplest way to format your HDD from USB is to use the professional partition management software - EaseUS Partition Master. With the assistance of this tool, you can create a bootable format tool that enables you to run the software on the problematic computer and then format the hard drive from USB without the operating system. To get things done, you need to create a bootable USB drive with a computer that is fully functional (Part 1), then apply it to format hard drive on the computer without OS (Part 2).Part 1: Create a Bootable USB Drive
Please refer to this page: create a bootable drive with EaseUS Partition Master.
After creating a bootable USB drive with the format tool, you can format your hard drive on the problematic computer from USB. Connect the USB to your computer and then open EaseUS Partition Master from the USB. Then follow the steps below.Part 2: Format Hard Drive from USBNotice:If you want to format all the partitions on your hard drive, you can either format the hard drive partitions one by one or choose to delete all the partitions on the HDD (right-click the hard drive and select Delete all partitions), then create new ones.
Step 1: Run EaseUS Partition Master, right-click the hard drive partition you intend to format and choose ’Format’.
Step 2: In the new window, set the Partition label, File system (NTFS/FAT32/EXT2/EXT3), and Cluster size for the partition to be formatted, then click ’OK’.
Step 3: Then you will see a warning window, click ’OK’ in it to continue.
Step 4: Click the ’Execute Operation’ button in the top-left corner to review the changes, then click ’Apply’ to start formatting the partition on your hard drive.
If you follow the guide above, you will use the bootable USB to format your hard drive successfully. Don’t miss this partition tool that can perfectly fulfill your needs.Method 2: Format HDD from USB using Command Prompt
Other than using the third-party tool, you can also format your hard drive from USB with the help of Windows Installation disk, which, as you will know, is relatively more complicated than using a bootable format tool as shown in Method 1.
Step 1: Create a Windows installation disk and boot your PC from it.
Step 2: Navigate Repair Your Computer --> Command Prompt.
Step 3: In the Command Prompt window, type diskpart and press ’enter’.
Step 4: Type list disk and press ’Enter’ to list all the disk drives.How To Format Usb Drive For Mac And Pc
Step 5: Type select disk + disk number, here you can find the number of the target disk by referring to the listed disk information.
Step 6: Type clean to wipe all files and folders on the selected disk.
Step 7: Type create partition primary and press ’Enter’.
Step 8: After diskpart successfully created the specified partition, type format fs=ntfs (or format fs=exfat) and press Enter. You’re telling diskpart to format the drive with a file system, let it be NTFS, exFAT, etc.
Step 9: At last, assign a drive letter to the newly created partition by typing assign.
The above guide shows you all the steps to partition and format a hard drive from USB using the diskpart command prompt. As you can see, It is a little bit tedious and time-consuming. If you want an easier way, a third-party bootable USB format tool will help.Can You Format Hard Drive from BIOS?
Other than following the bootable USB methods to format a hard drive, you can also try to format a hard drive from BIOS. It works in the same scenarios when something went wrong with the bootable partition or when you want to format C drive in Windows.
To format hard drive from BIOS settings, you got two options.Option 1. Boot into BIOS and Format in Windows
Step1: While booting up your computer, consecutively press F1, F2, F8 or Del key to enter BIOS settings.
Step2: Select the ’Advanced BIOS Features’ by pressing the arrow keys on the keyboard of your computer and then set the first boot device as the USB drive or CD, DVD.
Step3: After changing the BIOS settings, you can exit the screen and reboot your computer. Insert the bootable USB or CD/DVD, and your computer will boot from USB or CD, DVD.Disk Utility Format Usb For Mac And Pc
Step4: After booting the computer, you can go ahead to format the hard drive in Windows Explorer or Windows Disk Management.Option 2. Boot into BIOS and Format Using CMD
Step 1: While booting up your computer, consecutively press F1, F2, F8 or Del key to enter BIOS settings.
Step 2: Change the boot order to boot from USB/CD/DVD.
Step 3: Reboot your computer from the bootable disk. When your disk loaded, click ’Use this recovery tools that can help fix problems starting Windows’ and navigate to Windows installation > Command Prompt.
Step 4: In the Command Prompt window, type format c: /fs: ntfs and hit Enter.Which Way Do You Prefer Formatting A Hard Drive?
Based on the situations when you cannot normally start a computer, the boot partition fails to boot, or try to reinstall an operating system, it’s necessary to format a hard drive in a bootable environment. Concluding from what we presented in the article, you can start freely to format HDD from USB and format HDD from BIOS settings.Format A Usb Drive For Mac And Pc
No matter you choose to format hard drive from USB or BIOS settings, you must create a bootable USB or disc to boot into Windows. In comparison, EaseUS USB bootable format software is the easiest to create, and disk formatting is usually done in a few simple clicks. Whereas the Windows recovery disk is rather difficult to get, and format hard drive using CMD is higher-leveled. We don’t recommend average computer users to attempt for the first time.
If you have an external hard drive or USB flash drive that you’d like to use on both Macs and Windows PCs, choosing the right file system to format the drive can be confusing. Learn a few ways to make your drive Mac and PC friendly.
Need to access or transfer files between Mac and PC? As simple as this task sounds, it’s not very straightforward for inexperienced users. Since Mac OS X and Windows use totally different file systems, the way a drive is formatted can determine what type of computer it will work with. In fact, there are four ways you can format an external or USB flash drive to achieve varying degrees of compatibility between Macs and PCs. Let’s take a look at them:HFS+
Mac OS X’s native file system is HFS+ (also known as Mac OS Extended), and it’s the only one that works with Time Machine. But while HFS+ is the best way to format drives for use on Macs, Windows does not support it. If you’re only going to be using your external or USB flash drive with certain PCs – such as at home or the office – you might be interested in a program called MacDrive. When you install MacDrive on a Windows PC, it will be able to seamlessly read & write to HFS+ drives. This isn’t a good solution if you need your drive to work on any PC without installing software, though.NTFS
The native Windows file system is NTFS, which is only partially compatible with Mac OS X. Macs can read files on NTFS drives, but it cannot write to them. So if you need to get files from a PC to your Mac, NTFS is a decent option. However, you won’t be able to move files in the other direction, from Mac to PC.FAT32
The most universally supported way to format your drive is with the FAT32 file system. It works with all versions of Mac OS X and Windows. Case closed, right? Well, not so fast. Unfortunately, FAT32 is a very old file system and has some technical limitations. For example, you cannot save files that are larger than 4GB on a FAT32-formatted drive. This is a deal-breaker if you work with huge files. The other limitation is the total size of the partition. If you format your FAT32 drive in Windows, the drive partition cannot be larger than 32GB. If you format it from a Mac running 10.7 Lion, the drive partition can be up to 2TB. Much better, except for that pesky 4GB limit.Cannot Format Usb Drive Windows 10exFAT
The exFAT file system eliminates the two major deficiencies of FAT32: the largest partition and file sizes it supports are virtually unlimited by today’s standards. Awesome, it’s perfect! Almost… since exFAT is fairly new, it isn’t compatible with older Macs and PCs. Any Mac running 10.6.5 (Snow Leopard) or 10.7 (Lion) supports exFAT, while PCs running Windows XP SP3, Windows Vista SP1, and Windows 7 are compatible. If you know you’ll be using computers running updated versions of these operating systems, exFAT is the clear best choice.Format a drive using Disk Utility on a Mac
*Launch Disk Utility (Applications > Utilities).
*Select your external hard drive or USB flash drive from the list on the left.
*Click on the Erase tab. Select the format – Mac OS Extended (HFS+), MS-DOS (FAT32), or exFAT – then name the drive.
*Click the Erase button and the drive will start formatting. Be aware that formatting a drive deletes all of the files on it, so back up anything important before completing this step.Format a drive using Windows
*Go to Computer (or My Computer in Windows XP).
*Select your drive from the list and right-click on it. Choose Format from the contextual menu.
*A window will pop up where you can choose the format – NTFS, FAT32, or exFAT. Make sure the allocation unit size is set to default and type in a volume label.
*Click Start to format the drive.
Download here: http://gg.gg/nwdix
https://diarynote.indered.space
What Can You Do with Bootable USB Hard Drive Format Utility?
*Which Format For Usb Drive For Mac And Pc
*Sandisk Usb Format Tool
*How To Format Usb Drive For Mac And Pc
*Disk Utility Format Usb For Mac And Pc
*Format A Usb Drive For Mac And Pc
*Cannot Format Usb Drive Windows 10Which Format For Usb Drive For Mac And Pc
Almost everyone knows that formatting hard drives is not a difficult job and can be easily done with the built-in Disk Management tool in Windows. However, formatting a hard disk could be complex when your operating system cannot boot properly or your disk fails to work normally. That’s when you need to create a bootable USB to format your hard drive. You can format hard drive from USB by using a bootable USB drive created by a third-party HDD format tool or a Windows installation disk. Both are effective bootable USB hard drive format utilities. Read on and carry out the method best suited to your needs.
Both Windows and Mac OS offer built-in disk formatting tool. For Windows, it offers quick format feature when you right-click the hard drive on the computer. If you are using a Mac, you can run the built-in Disk Utility to quickly format a hard drive or external hard drive under Mac OS. Why should you consider formatting your hard drive? You might already know the consequences of.Sandisk Usb Format ToolPAGE CONTENT:Format HDD from USB with bootable format toolFormat hard drive from USB via Command promptFormat hard drive from BIOSMethod 1: Format Hard Drive from USB with Bootable format Tool
The simplest way to format your HDD from USB is to use the professional partition management software - EaseUS Partition Master. With the assistance of this tool, you can create a bootable format tool that enables you to run the software on the problematic computer and then format the hard drive from USB without the operating system. To get things done, you need to create a bootable USB drive with a computer that is fully functional (Part 1), then apply it to format hard drive on the computer without OS (Part 2).Part 1: Create a Bootable USB Drive
Please refer to this page: create a bootable drive with EaseUS Partition Master.
After creating a bootable USB drive with the format tool, you can format your hard drive on the problematic computer from USB. Connect the USB to your computer and then open EaseUS Partition Master from the USB. Then follow the steps below.Part 2: Format Hard Drive from USBNotice:If you want to format all the partitions on your hard drive, you can either format the hard drive partitions one by one or choose to delete all the partitions on the HDD (right-click the hard drive and select Delete all partitions), then create new ones.
Step 1: Run EaseUS Partition Master, right-click the hard drive partition you intend to format and choose ’Format’.
Step 2: In the new window, set the Partition label, File system (NTFS/FAT32/EXT2/EXT3), and Cluster size for the partition to be formatted, then click ’OK’.
Step 3: Then you will see a warning window, click ’OK’ in it to continue.
Step 4: Click the ’Execute Operation’ button in the top-left corner to review the changes, then click ’Apply’ to start formatting the partition on your hard drive.
If you follow the guide above, you will use the bootable USB to format your hard drive successfully. Don’t miss this partition tool that can perfectly fulfill your needs.Method 2: Format HDD from USB using Command Prompt
Other than using the third-party tool, you can also format your hard drive from USB with the help of Windows Installation disk, which, as you will know, is relatively more complicated than using a bootable format tool as shown in Method 1.
Step 1: Create a Windows installation disk and boot your PC from it.
Step 2: Navigate Repair Your Computer --> Command Prompt.
Step 3: In the Command Prompt window, type diskpart and press ’enter’.
Step 4: Type list disk and press ’Enter’ to list all the disk drives.How To Format Usb Drive For Mac And Pc
Step 5: Type select disk + disk number, here you can find the number of the target disk by referring to the listed disk information.
Step 6: Type clean to wipe all files and folders on the selected disk.
Step 7: Type create partition primary and press ’Enter’.
Step 8: After diskpart successfully created the specified partition, type format fs=ntfs (or format fs=exfat) and press Enter. You’re telling diskpart to format the drive with a file system, let it be NTFS, exFAT, etc.
Step 9: At last, assign a drive letter to the newly created partition by typing assign.
The above guide shows you all the steps to partition and format a hard drive from USB using the diskpart command prompt. As you can see, It is a little bit tedious and time-consuming. If you want an easier way, a third-party bootable USB format tool will help.Can You Format Hard Drive from BIOS?
Other than following the bootable USB methods to format a hard drive, you can also try to format a hard drive from BIOS. It works in the same scenarios when something went wrong with the bootable partition or when you want to format C drive in Windows.
To format hard drive from BIOS settings, you got two options.Option 1. Boot into BIOS and Format in Windows
Step1: While booting up your computer, consecutively press F1, F2, F8 or Del key to enter BIOS settings.
Step2: Select the ’Advanced BIOS Features’ by pressing the arrow keys on the keyboard of your computer and then set the first boot device as the USB drive or CD, DVD.
Step3: After changing the BIOS settings, you can exit the screen and reboot your computer. Insert the bootable USB or CD/DVD, and your computer will boot from USB or CD, DVD.Disk Utility Format Usb For Mac And Pc
Step4: After booting the computer, you can go ahead to format the hard drive in Windows Explorer or Windows Disk Management.Option 2. Boot into BIOS and Format Using CMD
Step 1: While booting up your computer, consecutively press F1, F2, F8 or Del key to enter BIOS settings.
Step 2: Change the boot order to boot from USB/CD/DVD.
Step 3: Reboot your computer from the bootable disk. When your disk loaded, click ’Use this recovery tools that can help fix problems starting Windows’ and navigate to Windows installation > Command Prompt.
Step 4: In the Command Prompt window, type format c: /fs: ntfs and hit Enter.Which Way Do You Prefer Formatting A Hard Drive?
Based on the situations when you cannot normally start a computer, the boot partition fails to boot, or try to reinstall an operating system, it’s necessary to format a hard drive in a bootable environment. Concluding from what we presented in the article, you can start freely to format HDD from USB and format HDD from BIOS settings.Format A Usb Drive For Mac And Pc
No matter you choose to format hard drive from USB or BIOS settings, you must create a bootable USB or disc to boot into Windows. In comparison, EaseUS USB bootable format software is the easiest to create, and disk formatting is usually done in a few simple clicks. Whereas the Windows recovery disk is rather difficult to get, and format hard drive using CMD is higher-leveled. We don’t recommend average computer users to attempt for the first time.
If you have an external hard drive or USB flash drive that you’d like to use on both Macs and Windows PCs, choosing the right file system to format the drive can be confusing. Learn a few ways to make your drive Mac and PC friendly.
Need to access or transfer files between Mac and PC? As simple as this task sounds, it’s not very straightforward for inexperienced users. Since Mac OS X and Windows use totally different file systems, the way a drive is formatted can determine what type of computer it will work with. In fact, there are four ways you can format an external or USB flash drive to achieve varying degrees of compatibility between Macs and PCs. Let’s take a look at them:HFS+
Mac OS X’s native file system is HFS+ (also known as Mac OS Extended), and it’s the only one that works with Time Machine. But while HFS+ is the best way to format drives for use on Macs, Windows does not support it. If you’re only going to be using your external or USB flash drive with certain PCs – such as at home or the office – you might be interested in a program called MacDrive. When you install MacDrive on a Windows PC, it will be able to seamlessly read & write to HFS+ drives. This isn’t a good solution if you need your drive to work on any PC without installing software, though.NTFS
The native Windows file system is NTFS, which is only partially compatible with Mac OS X. Macs can read files on NTFS drives, but it cannot write to them. So if you need to get files from a PC to your Mac, NTFS is a decent option. However, you won’t be able to move files in the other direction, from Mac to PC.FAT32
The most universally supported way to format your drive is with the FAT32 file system. It works with all versions of Mac OS X and Windows. Case closed, right? Well, not so fast. Unfortunately, FAT32 is a very old file system and has some technical limitations. For example, you cannot save files that are larger than 4GB on a FAT32-formatted drive. This is a deal-breaker if you work with huge files. The other limitation is the total size of the partition. If you format your FAT32 drive in Windows, the drive partition cannot be larger than 32GB. If you format it from a Mac running 10.7 Lion, the drive partition can be up to 2TB. Much better, except for that pesky 4GB limit.Cannot Format Usb Drive Windows 10exFAT
The exFAT file system eliminates the two major deficiencies of FAT32: the largest partition and file sizes it supports are virtually unlimited by today’s standards. Awesome, it’s perfect! Almost… since exFAT is fairly new, it isn’t compatible with older Macs and PCs. Any Mac running 10.6.5 (Snow Leopard) or 10.7 (Lion) supports exFAT, while PCs running Windows XP SP3, Windows Vista SP1, and Windows 7 are compatible. If you know you’ll be using computers running updated versions of these operating systems, exFAT is the clear best choice.Format a drive using Disk Utility on a Mac
*Launch Disk Utility (Applications > Utilities).
*Select your external hard drive or USB flash drive from the list on the left.
*Click on the Erase tab. Select the format – Mac OS Extended (HFS+), MS-DOS (FAT32), or exFAT – then name the drive.
*Click the Erase button and the drive will start formatting. Be aware that formatting a drive deletes all of the files on it, so back up anything important before completing this step.Format a drive using Windows
*Go to Computer (or My Computer in Windows XP).
*Select your drive from the list and right-click on it. Choose Format from the contextual menu.
*A window will pop up where you can choose the format – NTFS, FAT32, or exFAT. Make sure the allocation unit size is set to default and type in a volume label.
*Click Start to format the drive.
Download here: http://gg.gg/nwdix
https://diarynote.indered.space
コメント